ALDOSEAL 385 is a technologically advanced, high solids, single component moisture cure polyurethane elastomeric sealant. In addition, ALDOSEAL 385 is a brush grade sealant and an excellent all-purpose sealer to address roof leaks on most roofing substrates.
ALDOSEAL 385 is produced in an aluminum gray color that allows for faster cure times than white sealants, mil for mil. ALDOSEAL 385 provides greater protection against leaks and water penetration than most sealants due to its tenacious adhesive properties, higher tensile strength and low vapor permeability values. In summary, ALDOSEAL 385 offers a wider window of application than water based acrylic sealants.
ALDOSEAL 385 is specifically designed as a protective sealant during the detail phase of complete elastomeric roof coating restoration work. This product is formulated to seal fasteners and seams and penetrations on ametal roof systems, seams and penetrations on single plymembrane systems and fill cracks and voids on older BUR systems. In addition, ALDOSEAL 385 is an ideal all purpose sealant to quickly and permanently seal leak areas on virtually any roofing system.
TYPICAL PHYSICAL PROPERTIES
TOTAL SOLIDS: 79 ± 2% by weight
WEIGHT PER GALLON: 9.2 lb per gallon ± 0.2
FLASH POINT: 80° F
CLEAN UP: Xylene
SHELF LIFE: 90 days @ 40°- 90° F
VISCOSITY: 30,000 ± 10,000 cP
ELONGATION: 150% ± 50
HARDNESS: 69 Shore A
TENSILE STRENGTH: 240 psi ± 25
PERMEABILITY: .02 perm inch
SERVICE TEMPERATURE: -50º TO 200º F
WATER ABSORPTION: 2.4%
ADHESION: .Exceeds Tensile
CURE TIMES: DRY TO TOUCH: 6 Hours
TACK FREE: 8- 12 Hours
RECOAT: 12- 16 Hours
Have a question? Ask Aldo how we can help you and your clients!
In the middle of summer a metal roof can get in upwards of 180 degrees on the surface; that is only 32 degrees colder than the boiling point of water. In case you are curious… that is HOT! And if a metal roof surface is that hot, imagine what it is doing to the...read more
Stay up to date with all the latest Aldo news!!! Submit your email for up-to-the-minute news.