Aldo Products Company, Inc. recommends airless spray equipment to efficiently and effectively apply all ALDOCOAT products. Please refer to the following equipment specifications.
1. A gas powered airless spray rig with 3000 psi minimum.
2. Tip size of .031 to .035 for elastomeric coatings; .019-.021 for primer products.
3. Hose size of 3/8” for the first 100 feet; for additional footage, use larger size hose (1/2”).
It is important to always maintain the 3/8” for the first 100 feet from the spray gun towards the pump to maintain pressure. All elastomeric coatings are to be applied in a two-coat, cross directional pattern in order to ensure the proper coverage rate and dry film thickness (DFT) required for warranty protection. If proper results are not being achieved, please contact the Technical Department of Aldo Products Company, Inc. immediately.
Have a question? Ask Aldo how we can help you and your clients!
In the middle of summer a metal roof can get in upwards of 180 degrees on the surface; that is only 32 degrees colder than the boiling point of water. In case you are curious… that is HOT! And if a metal roof surface is that hot, imagine what it is doing to the...read more
Stay up to date with all the latest Aldo news!!! Submit your email for up-to-the-minute news.